The Tool Box - Faithfull Handtools

Click on picture to
view a larger image

Description

Price
Inc. VAT

Click button
to Buy

FAICARPBAG - This excellent set of tools includes a No 5 smoothing plane, a block plane, 9-inch try square, 9-inch sliding bevel, spokeshave, mortise gauge and marking knife.

£91.03

FAIPLANE6 - The No 6 'Fore' plane is used for truing up extra long boards prior to being joined together. This 18in plane with its 2 3/8in wide blade is indispensible when hanging tall doors.

£43.00

FAIPLANE5 - This traditional No 5 'Jack' plane has a longer base than the 'Smoothing' plane and is used for truing up longer boards particularly when joining pieces together to form a table top or the side of a cabinet.

£40.09

PLANE4B - The No 4 'Smoothing' plane is the most frequently used in the workshop for applications on all woods and man made boards when a smooth flat surface is required. This plane is made to a traditional design to give infinite adjustment with precision performance.

£27.82

PLANE3 - Ideally suitable for the final finishing of cabinet work and fine joinery. This plane makes a perfect follow-on to the No 4 Smoothing plane.

£19.75

PLANE10 - This 'Bailey' style rebate plane is more comfortable and easier to use than the 'Duplex' version as it is wider and better balanced, which ensures a more perfect right angle at the rebate.

£42.56

PLANE6012 - This block plane is a joy to use! Small enough to use single handed and is particularly useful when shaping end grain as it has a lower angle of cut. The mouth is adjustable for coarse or fine grain.

£26.48

FAIPLANE778 - The rebate plane is used to create rebate or 'shoulders' in timber when a true right angle is required. The blade is the same width as the sole of the plane making it perfect for cleaning up the shoulders on tenons. Includes an adjustable fence and depth stop.

£50.88

FAIWCBS6WC - Set of 6 bevel-edged chisels with impact resistant handles designed to be used with a mallet. The bevelled edges make these chisels ideal for cutting out joints and for cutting into tight corners. All chisels are supplied with blade guards.

£44.54

WCBS3BC - Similar to the above set but with 3 of the most popular sizes - ½, ¾, and 1in.

£14.53

FAIDW150F - Diamond Bench Stone 150 x 65mm 600 Grit Fine.

£19.75

FAIDW300VF - Diamond Bench Stone 300 x 65mm 1000 Grit very fine for sharpening chisels and planes.

£42.52

FAIHG - This excellent honing guide maintains the correct angle for chisels and plane irons when restoring a good cutting edge. Can be used with all chisel shapes and plane irons.

£6.92

FAICM4 - Manufactured from straight grained beech this mallet is ideal for general workshop use with chisels. A mallet will benefit from removing the shaft and filling the mortise with linseed oil and allowing it to soak into the head over the period of a week.

£10.38

FAIRMW214 - This white rubber mallet is used for assembling projects which need knocking together prior to cramping. The rubber head will not damage or mark the work piece. A very underrated and essential workshop tool.

£6.73

FAITMRC - Ingenious 5m Right Cut measuring device.

£13.26

FAITM5SS - Stainless Steel Tape Measure. This uniquely shaped tape measure fits comfortably in the hand. The soft-grip jacket is resistant to impact and incorporates a sturdy belt clip and hand strap. The blade is coated with a matt finish anti-glare yellow nylon coating, for better wear resistance and visibility. Stainless steel case with easy action thumb operated brake. Blade width: 25 mm (1 inch). Size: 5 m (16 ft).

£7.27

FAICPSHARP - Carpentry pencils and sharpener.

£2.93

FAIRULE300 - 300mm (12in) flat rule essential for marking out accurately.

£2.74

FAIRULE1000 - 1000mm (39in) flat rule for marking out and using as a straight edge.

£7.02

FAICALDIG - The digital vernier calliper is an indispensable tool for accurately measuring internal and external sizes especially when it comes to drills, bolts and dowels.

£32.39

FAITRY9 - The try square is used for accurately marking out and checking for squareness.

£16.15

FAISB9 - The sliding bevel is used for transferring and repeating angles when setting out.

£11.83

FAIMKNIFE - The marking out knife is used for accurately marking shoulder lines on joints.

£7.03

FAIRCOMB - This dual-purpose very well made gauge can be used for general marking out or with the second pin adjusted, by a screwslide, very accurate mortises can be achieved.

£25.69

FAICH20FG - Fibreglass handled 20oz claw hammer for nailing in round wire nails.

£10.69

FAIJWH12 - 12oz Warrington hammer for nailing in oval wire or loss head nails.

£12.86

FAIJWH6 - 6oz Warrington pin hammer for nailing in panel and veneer pins.

£10.85

FAIPPUNCHBOX - Set of 8 assorted sized pin punches for driving nails below the surface.

£17.50

FAINAILPULL - Nail puller for drawing out nails which have been set below the surface.

£35.95

FAIPL162180 - Pincers for removing pins and small nails.

£17.60

FAIDS57 - 57 piece drill and screw bit set for wood, masonry and metal. Screwdriver bits for slotted, Pozidrive, Phillips, Torx and a countersink all for use in the Hex magnetic holder.

£14.70

FAIMSET25PRO - A superb 25 piece set of HSS twist drills in sizes from 1mm - 13mm.

£66.72

FAIWDBSET5 - Set of 5 lip and spur drill bits especially for wood and man made boards.

£7.49

FAICS12HSCH - HSS countersink for use on all woods and metals.

£8.48

FAIBRADCP - Chisel point Bradawl to make pilot holes for small screws.

£2.77

FAISSINKS4 - Set of 4 screwsinks Nos 6, 8, 10, & 12 used to drill and countersink in one operation. By drilling deeper the screwsink forms the correct sized hole for a pellet which has been cut with a plug cutter of the corresponding size. Especially effective in hardwoods.

£15.35

FAIPLUGS4 - Set of 4 plug cutters Nos 6, 8, 10 & 12 used in conjunction with a screwsink. Ideally should be used in a pillar drill or a power drill kept perfectly perpendicular.

£13.86

FAISDSET10 - Set of 10 soft grip colour coded screwdrivers comprising 4 Pozidrive, 3 parallel and 3 flared to fit both screw designs, sizes 6, 8, and 10, all mounted on a wall rack.

£21.56

FAITKR - An all-purpose utility knife with retracting blade housed in a strong die cast body.

£3.88

FAIUBAR - This utility bar is very useful when any demolition work is being undertaken.

£4.81

FAICA - Carpenter's Apron. A traditional style carpenter's apron manufactured from quality linen. Machine washable. One size fits all. Twin front pockets with tie straps.

£4.92

FAISLVG600 - A 600mm (24in) three vial spirit level. Extra-strong curved alloy box section spirit level with 1.8mm wall thickness and milled working edges for greater precision. Factory set vials to an accuracy of +/-0.5mm per metre. Each level has a V groove base for use on pipe work and integral hand grips for ease-of-use and a powder coating with impact proof end caps for protection.

£19.96

FAISLVG1200 - A 1200mm (48in) three vial spirit level. Extra-strong curved alloy box section spirit level with 1.8mm wall thickness and milled working edges for greater precision. Factory set vials to an accuracy of +/-0.5mm per metre. Each level has a V groove base for use on pipe work and integral hand grips for ease-of-use and a powder coating with impact proof end caps for protection.

£37.19

FAISLVG1800 - A 1800mm (70in) three vial spirit level. Extra-strong curved alloy box section spirit level with 1.8mm wall thickness and milled working edges for greater precision. Factory set vials to an accuracy of +/-0.5mm per metre. Each level has a V groove base for use on pipe work and integral hand grips for ease-of-use and a powder coating with impact proof end caps for protection.

£52.42

FAISCAL36 - Aluminium 36in sash cramp providing a quick and powerful action.

£15.64

FAISCAL48 - Aluminium 48in sash cramp providing a quick and powerful action.

£17.33

FAIVW175DQ - Woodwork Vice 7in Quick-Release with Dog

£89.05

FAIC18 - Cork sanding block - essential for the correct use of finishing paper.

£1.80

FAIAR580G - 5M x 115mm roll of 80 grit aluminium oxide abrasive paper.

£5.39

FAIAR5120G - 5M x 115mm roll of 120 grit aluminium oxide abrasive paper.

£4.90

FAIARS115320 - 5M x 115mm roll of 320 grit silicon carbide finishing paper.

£5.28

All prices quoted are subject to confirmation when the order is placed.